When selecting the Wood Moulding, the back side of the request material cut flat, smooth and flat appearance, uniform maintenance paint.
1. Wood Moulding background wall before preparation
- Before the installation of the background wall, the wall shall be leveling treatment, the wall shall be coated with dongyang Wood Moulding moisture-proof layer for maintenance.
- When selecting the Wood Moulding, the back side of the request material cut flat, smooth and flat appearance, uniform maintenance paint. Bounce line is carried out according to the width of Wood Moulding, and construction can only be carried out when the wall is air-dried.
2. Wall drilling device wood wedge
- Begin construction in dry metope, to make wall of wooden line setting is secured more solid, can line of picture frame is in first on metope bookbinding wood wedge makes bracket. The request device is aligned with the spring line, and the wooden wedge is flat and close to the wall.
- Can make data of setting wall is forced so more even and stable, and about the wooden line with lighter quality of a material, visible state does not apply wood wedge, direct device goes up the wall.
3. Wood Moulding joint seam processing
- The solid wood base material must be dried. The moisture content of the dried European Wood Moulding is about 15% in the south and 13% in the north;
- The panel of the line, such as Wood Moulding, is made of density board or plywood. It must be made of thicker materials, generally with a thickness of over 3.7mm.
- When applying glue to compound and nail ears, the lines must be shaped before the glue dries;
- The newly made lines should be laid flat to ensure that the glue is completely dry before the shaping;
- 2~3 3-4mm deep anti-deformation grooves are opened on the back of line solid wood substrate.